we supply komatsu RTB & MINI EXCAVATOR DIRECT REPLACEMENT PARTS EXCAVATORS 20X-70-14151HX 8.5 Lbs. ( 3.9 Kgs.) Machine Model PC 60 PC 75 PC 80 PC 90 WB140 WB150 20X-70-00100P Tooth Types Machine Model Part Number Tooth Types A B PC 60 PC 75 PC 80 PC 90 To

RTB & MINI EXCAVATOR DIRECT REPLACEMENT PARTS EXCAVATORS 20X-70-14151HX 8.5 Lbs. ( 3.9 Kgs.) Machine Model PC 60 PC 75 PC 80 PC 90 WB140 WB150 20X-70-00100P Tooth Types Machine Model Part Number Tooth Types A B PC 60 PC 75 PC 80 PC 90 Tooth Dimensions-Inches ( MM) WB140 WB150 20X-70-14160HX Standard 7 ( 178) 2-1/ 2 ( 64) 5.3 2.4 20X-70-14160SHX Short 5 ( 127) 2-3/ 4 4.8 2.2 20X-70-14160RC Rock Chisel 20X-70-00100P 7-3/ 4 ( 197) 2-17/ 32 ( 64) 6.6 3.0 20X-70-14160WT Twin Tiger 8-1/ 2 ( 216) 3-13/ 16 ( 97) 6.1 2.8 T20X-70-14160 Tiger 8-1/ 2 ( 216) 1/ 4 ( 6) 5.0 2.3 20X-70-14160HX Standard 7 ( 178) 2-1/ 2 ( 64) 5.3 2.4 20X-70-14160RC Rock Chisel 20X-70-00100P 7-3/ 4 ( 197) 2-17/ 32 ( 64) 6.6 3.0 20X-70-14160WT Twin Tiger 8-1/ 2 ( 216) 3-13/ 16 ( 97) 6.1 2.8 T20X-70-14160 Tiger 8-1/ 2 ( 216) 1/ 4 ( 6) 5.0 2.3 Weight Lbs. Kgs. Tooth Fastener Pocket NOT A DIRECT REPLACEMENT This adapter fits a 1-1/ 2” lip with a 30O bevel. Fits PC400 205-939-1270HX 21.8 Lbs. ( 9.9 Kgs.) NOT A DIRECT REPLACEMENT This adapter fits a 1-1/ 4” lip with a 30O bevel. 205-939-1580HX 25.0 Lbs. ( 11.3 Kgs.) NOT A DIRECT REPLACEMENT This adapter fits a 1-1/ 2” lip with a 30O bevel. Adapter Pin w/ Snap Ring Standard Short Rock Chisel Twin Tiger Tiger 3 Standard Tiger Twin Tiger Rock Chisel “ SYL” Flare Machine Model Part Number Tooth Types A B Lbs. PC 100 PC 120 PC 150 PC 200 PC 400 205-70-19570HX Standard 8-3/ 4 ( 222) 3-1/ 8 ( 79) 9.7 4.4 T205-70-19570 Tiger 10-5/ 8 ( 270) -- 10.6 4.8 205-70-19570WT Twin Tiger 092-44-02496P 10-5/ 8 ( 270) 4-3/ 4 ( 121) 12.7 5.8 205-70-19570RC Rock Chisel 10-11/ 16 ( 271) 3-11/ 16 ( 94) 13.8 6.3 205-70-19570SYL SYL 10-1/ 4 ( 260) 3-11/ 16 ( 94) 12.5 5.7 205-70-19570F Flare 9-1/ 2 ( 241) 6-1/ 2 ( 13) 13.2 6.0 207-70-14151HX Standard 9-5/ 8 ( 244) 3-3/ 4 ( 95) 16.0 7.3 T207-70-14151 Tiger 11-1/ 2 ( 292) -- 16.0 7.3 207-7014151WT Twin Tiger 175-78-21740P 11-1/ 2 ( 292) 5-3/ 4 ( 146) 19.3 8.8 207-70-14151RC Rock Chisel 11-3/ 8 ( 289) 4-1/ 4 ( 108) 21.0 9.5 207-70-14151SYL SYL 11 ( 279) 4-1/ 2 ( 114) 17.3 7.9 207-70-14151F Flare 10-1/ 4 ( 260) 7-1/ 2 ( 191) 20.4 9.3 208-70-14152HX Standard 10-11/ 16 ( 271) 4-1/ 2 ( 114) 23.3 10.6 208-70-14270HX Standard 12-1/ 2 ( 318) 4-3/ 4 ( 121) 32.2 14.6 T208-70-14152 Tiger 14 ( 356) -- 27.7 12.6 208-70-14152WT Twin Tiger 426-847-2310P 14 ( 356) 6-3/ 4 ( 171) 30.1 13.7 208-70-14152RC Rock Chisel 13-1/ 2 ( 343) 4-11/ 16 ( 119) 34.0 15.4 208-70-14152SYL SYL 13-1/ 4 ( 337) 5-1/ 8 ( 130) 26.4 12.0 208-70-14152F Flare 11-1/ 2 ( 292) 9 ( 229) 30.0 13.6 209-70-54210HX Standard 209-70-52420P 13-3/ 4 ( 349) 5-5/ 8 ( 143) 63.0 28.6 21N-72-14290HX Standard 21N-72-14330P 16-5/ 8 ( 422) 6-3/ 8 ( 162) 93.5 42.4 PC 220 PC 280 PC 300 PC 360 PC 650 PC 1000 A B C Machine Model 4-5/ 16 ( 110) 3-1/ 8 ( 79) 2-15/ 16 ( 75) PC 100 PC 120 PC 150 PC 200 PC 220 PC 280 PC 300 PC 360 4-9/ 16 ( 116) 3-3/ 8 ( 86) 3-11/ 16 ( 94) PC 400 5-13/ 16 ( 148) 3-5/ 8 ( 92) 4-11/ 32 ( 110) PC 650 6-7/ 8 ( 175) 5-13/ 32 ( 137) 5-1/ 16 ( 129) PC 1000 9-1/ 2 ( 241) 7-9/ 32 ( 185) 4-7/ 8 ( 124) A B Pin Part Number 31/ 32 ( 25) dia. 31/ 32 ( 25) dia. 3-25/ 32 ( 96) 4-5/ 8 ( 117) 092-44-02496P 175-78-21740P 209-70-54240P 6-5/ 8 ( 168) 1-13/ 32 ( 36) dia. 21N-72-14330P 6-1/ 2 ( 165) 1-9/ 16 ( 40) dia. 426-847-2310P 5-21/ 32 ( 143) 1-5/ 32 ( 29) dia. Pins Tooth Dimensions- Inches ( MM) EXCAVATORS - CONTINUED Dimensions: Inches ( MM) Dimensions: Inches ( MM) Tooth Fastener Weight Kgs. Direct Replacement Teeth Tooth Pocket 4 EXCAVATORS - CONTINUED Vertical Edge Protector K3814 ( PC1800) 149.0 lbs. ( 67.6 kgs.) 5 LOADERS * See appropriate series brochure for tooth details. Bolt-on Adapters for Komatsu Loaders Hensley Replacement Adapters 142X135 ( RH shown) 141X135 ( LH opposite) 9.5 lbs. ( 4.3 kgs.) Requires ( 1) A34-300 & ( 1) A34-200 plow bolt assemblies 140X135 ( center) 8.6 lbs. ( 3.9 kgs.) Requires ( 2) A34-300 plow bolt assemblies WA120 135 series adapters Parabolic adapters are still available. ( 140X160, 141X160 & 142X160) 122X235 ( RH shown) 121X235 ( LH opposite) 16.9 lbs. ( 7.7 kgs.) Requires ( 1) A10-200 & ( 1) A10-312 plow bolt assemblies 120X235 ( center) 19.7 lbs. ( 8.9 kgs.) Requires ( 2) A10-312 plow bolt assemblies WA180 235 series adapters Parabolic adapters are still available. ( 120X220, 121X220 & 122X220) WA120 center 140X135 ( 140X160) 417-847-1140 416-847-A110 ( 18 conical) left hand 141X135 ( 141X160) 417-847-1120 416-847-A120 ( 18 conical) right hand 142X135 ( 142X160) 417-847-1130 416-847-A130 ( 18 conical) WA180 center 120X235 ( 120X220) 418-847-1120 5780-V19 left hand 121X235 ( 121X220) 418-847-1160 5781L-V19 right hand 122X235 ( 122X220) 418-847-1170 5781R-V19 WA250 / WA320 center 111X295 419-847-1111 4798-V23 left hand 112X295 419-847-1121 5763L-V23 right hand 113X295 419-847-1131 5763R-V23 WA380 / WA420 / WA450 center 142X335 423-847-1111 5764-V23 & 5764-V29 left hand 145X335 423-847-1121 5765L-V23 & 5765L-V29 right hand 146X335 423-847-1131 5765R-V23 & 5765R-V29 D66S center 142X335 142-70-12230 5764-V23 & 5764-V29 left hand 143X335 142-70-12240 right hand 144X335 142-70-12250 WA500 center 191X385 425-847-1191 5750-V39 left hand 192X385 425-847-1211 5765L-V39 right hand 193X385 425-847-1221 5765R-V39 Loader Model/ Adapter Position Hensley Part Number Replaces Komatsu Part Number Replaces Esco Part Number Hensley Tooth Series* 135 ( 160) 235 ( 220) 295 335 385 335 6 Hensley Replacement Adapters- continued 113X295 ( RH shown) 112X295 ( LH opposite) 21.3 lbs. ( 9.7 kgs.) Requires ( 1) A10-334 & ( 1) A10-200 plow bolt assemblies 111X295 ( center) 23.7 lbs. ( 10.8 kgs.) Requires ( 2) A10-334 plow bolt assemblies WA250 / WA320 295 series adapters 146X335 ( RH shown) 145X335 ( LH opposite) 33.3 lbs. ( 15.1 kgs.) Requires ( 3) A78-400 plow bolt assemblies 142X335 ( center) 31.1 lbs. ( 14.1 kgs.) Requires ( 3) A78-400 plow bolt assemblies WA380 / WA420 / WA450 335 series adapters D66S 335 series adapters 144X335 ( RH shown) 143X335 ( LH opposite) 34.6 lbs. ( 15.7 kgs.) Requires ( 3) A78-400 plow bolt assemblies 142X335 ( center) 31.1 lbs. ( 14.1 kgs.) Requires ( 3) A78-400 plow bolt assemblies LOADERS - CONTINUED 7 LOADERS - CONTINUED WA500 385 series adapters 193X385 ( RH shown) 192X385 ( LH opposite) 59.0 lbs. ( 26.8 kgs.) Requires ( 2) A10-412 & ( 1) A114-300 plow bolt assemblies 191X385 ( center) 54.0 lbs. ( 24.5 kgs.) Requires ( 3) A10-412 plow bolt assemblies Hensley Replacement Adapters - continued Direct Replacement Teeth Machine Model Part Number Tooth Types A B Weight Lbs. Kgs. WA350-470 423-847-1140RP2 Rock Penetrator 175-78-21740P 12-1/ 2 ( 317) 4-1/ 8 ( 105) 28.2 12.8 426-847-1110HX Standard 11-3/ 8 ( 289) 4-1/ 4 ( 108) 27.0 12.3 426-847-1110RP2 Rock Penetrator 426-847-2310P 13-3/ 4 ( 349) 5 ( 127) 47.0 21.3 426-847-1110RP3 Rock Penetrator 13-13/ 16 ( 351) 5-1/ 8 ( 130) 57.0 25.9 426-70-13311HX Bolt-On 1 Pc. N/ A 26 ( 660) 4-7/ 8 ( 124) 103.0 46.7 427-70-13731HX Short Sharp 427-70-13790P 13-7/ 8 ( 353) 5-9/ 16 ( 142) 64.0 29.0 427-70-13780RP3 Rock Penetrator 427-70-13790P 16-1/ 4 ( 413) 6-1/ 2 ( 166) 103.0 46.7 Tooth Dimensions- Inches ( MM) WA500 WA600 WA600 Tooth Fastener A B C Machine Model Tooth Pocket WA350-470 WA500 WA600 A B Pin Part Number 175-78-21740P Pins 426-847-2310P Short Sharp Standard Rock Penetrator Bolt-On 1 Pc. Tooth & Adapter WA700 WA800 4-9/ 16 ( 116) 3-3/ 8 ( 86) 3-11/ 16 ( 94) 4-3/ 4 ( 121) 4-9/ 32 ( 109) 4-5/ 16 ( 110) No Pocket; Bolt-On 1 pc. 5-9/ 32 ( 135) 5-3/ 16 ( 132) 4-25/ 32 ( 122) 4-5/ 8 ( 117) 31/ 32 ( 25) dia. 5-21/ 32 ( 143) 1-5/ 32 ( 29) dia. No Pin: Bolt-On 1 pc. 6-5/ 8 ( 169) 1-5/ 32 ( 29) dia. Dimensions: Inches ( MM) Dimensions: Inches ( MM) WA700 WA800 427-70-13790P WA600 8 Hensley Half Arrow Bolt-On Segments LOADERS - CONTINUED 425-838-A110NR ( WA500) 44.5 lbs. ( 20.2 kgs.) Requires ( 2) A10-400 plow bolt assemblies each Hensley Bolt-On Heel Plates 428-70-12250MBO ( WA700) 231.0 lbs. ( 104.9 kgs.) Requires ( 4) A10-412 plow bolt assemblies WA8003HP ( WA800) 216.0 lbs. ( 98.1 kgs.) Requires ( X) XXXXX plow bolt assemblies 425-838-A110RNR ( WA500) shown 425-838-A110LNR ( WA500) opposite 54.0 lbs. ( 24.5 kgs.) Requires ( 2) A10-400 plow bolt assemblies each MS600CNR ( WA600) 86.5 lbs. ( 39.0 kgs.) Requires ( 3) A114-400 plow bolt assemblies each Use with RP1 teeth. MS600RNR ( WA600) shown MS600LNR ( WA600) opposite 87.0 lbs. ( 39.5 kgs.) Requires ( 3) A114-400 plow bolt assemblies each Use with RP1 teeth. 9 LOADERS - CONTINUED MS600RNRH ( WA600) shown MS600LNRH ( WA600) opposite 122.5 lbs. ( 55.6 kgs.) Requires ( 3) A114-400 plow bolt assemblies each Use with RP2 teeth. MS600CNRH ( WA600) 117.5 lbs. ( 53.3 kgs.) Requires ( 3) A114-400 plow bolt assemblies each Use with RP2 teeth. WA700CNR ( WA700) 163.0 lbs. ( 74.0 kgs.) Requires ( 4) A114-412 plow bolt assemblies each WA700RNR ( WA700) shown WA700LNR ( WA700) opposite 167.0 lbs. ( 75.8 kgs.) Requires ( 4) A114-412 plow bolt assemblies each Hensley Half Arrow Bolt-On Segments - continued 10 LOADERS - CONTINUED Hensley Top Covers WA600-TCC ( WA600) 33.5 lbs. ( 15.2 kgs.) For use with MS600CNRH segments. WA600-TCR ( WA600) shown WA600-TCL ( WA600) opposite 36.5 lbs. ( 16.6 kgs.) For use with MS600RNRH and MS600LNRH segments WA700-TCC ( WA700) 36.7 lbs. ( 16.7 kgs.) For use with WA700CNR segments WA700-TCR ( WA700) shown WA700-TCL ( WA700) opposite 37.2 lbs. ( 16.9 kgs.) For use with WA700RNR and WA700LNR segments * Plow bolt assembly information based on Hensley designed buckets and base edges. Changes to base edge thickness and counter bore depth will result in a change in the required bolt length and bolt thread length. ft-lbs Nm PB114600 1-1/ 4" -7X6" plow bolt 6" ( 1-1/ 4" ) 3-1/ 2" ( 7) 1, 700 ± 220 2, 3000 ± 300 N114C 1-1/ 4" hex cone nut - - - - N114 1-1/ 4" hex nut grade 8 - - - - 114LW 1-1/ 4" lock washer - - - - PB114612 1-1/ 4" -7X6-1/ 2" plow bolt 6-1/ 2" ( 1-1/ 4" ) 4" ( 7) 1, 700 ± 220 2, 3000 ± 300 N114C 1-1/ 4" hex cone nut - - - - N114 1-1/ 4" hex nut grade 8 - - - - 114LW 1/ 14" lock washer - - - - AC114600TC AC114612TC WA600 ( 2-1/ 2" ) WA700 ( 2-1/ 2" ) WA800 ( 3" ) WA900 ( 3" ) MACHINE ( LIP THICKNESS) PLOW BOLT ASSEMBLY TOP COVER PLOW BOLT ASSEMBLIES* TORQUE RECOMMENDATIONS ASSEMBLY HARDWARE PART NUMBERS HARDWARE D ESCRIPTION BOLT LENGTH ( BOLT DIAMETER) BOLT THREAD LENGTH ( THREADS PER INCH) 11 WA380-5 423-815-2210NRHX 102.0 lbs. ( 46.0 kgs.) Requires ( 2) A78-300 plow bolt assemblies 421-815-2220NRHX 37.6 lbs. ( 17.1 kgs.) Requires ( 3) A78-300 plow bolt assemblies LOADERS - CONTINUED Hensley Half Arrow Bolt-On Edges # Req’ d. Bolt/ Nut Assemblies WA380-5 423-815-2210NRHX 4 ( 2) ea. A78-300 421-815-2220NRHX 2 ( 3) ea. A78-300 WA400 424-815-2210NR 2 ( 4) ea. A78-300 424-815-2220NR 2 ( 3) ea. A78-300 WA420-1 421-70-12122CNR 1 ( 6) ea. A78-314 RH: 421-70-12122RNR 1 ( 6) ea. A78-314 S/ N 10001-20001 LH: 421-70-12122LNR 1 WA450-1 421-70-12122CNR 1 ( 6) ea. A78-314 RH: 421-70-12320RNR 1 ( 6) ea. A78-314 S/ N 10001-20001 LH: 421-70-12320LNR 1 WA450-3 421-815-1211CNR 1 ( 6) ea. A10-312 421-815-1221NR 2 ( 4) ea. A10-312 WA470 RH: 421-815-1211RCNR 1 ( 4) ea. A10-312 LH: 421-815-1211LCNR 1 ( 4) ea. A10-312 WA470-5 423-815-2211NRHX 5 ( 2) ea. A78-300 421-815-2220NRHX 2 ( 3) ea. A78-300 WA500-1 425-815-1110CNR 3 ( 4) ea. A10-400 RH: 425-815-1120RNR 1 ( 2) ea. A10-400 S/ N 10001-19999 LH: 425-815-1120LNR 1 WA500-1 RH: 425-815-2210RNR 1 ( 4) ea. A10-400 425-815-1320NRHX 2 ( 4) ea. A10-400 From S/ N 20001 LH: 425-815-2210LNR 1 WA500-3 WA500-3 425-815-1510CNRHX 1 ( 4) ea. A10-400 425-815-1520NRHX 2 ( 2) ea. A10-400 LH/ RH: 425-815-1510RLNRHX 2 ( 4) ea. A10-400 WA600-1/ WA600-3 426-815-1110NRHX 3 ( 4) ea. A138-400 426-815-1130NRHX 2 ( 4) ea. A138-400 Model Center Edge End Edge # Req’ d. Bolt/ Nut Assemblies WA400 424-815-2210NR 186.0 lbs. ( 84.4 kgs.) Requires ( 4) A78-300 plow bolt assemblies 424-815-2220NR 38.7 lbs. ( 17.6 kgs.) Requires ( 3) A78-300 plow bolt assemblies 12 LOADERS - CONTINUED WA420-1 ( S/ N 10001 - 20001) TYPICAL END VIEW 421-70-12122RNR ( RH shown) 421-70-12122LNR ( LH opposite) 160.0 lbs. ( 72.6 kgs.) Requires ( 6) A78-314 plow bolt assemblies 421-70-12122CNR 158.0 lbs. ( 71.7 kgs.) Requires ( 6) A78-314 plow bolt assemblies WA450-1 ( S/ N 10001 - 20001) 421-70-12320RNR ( RH shown) 421-70-12320LNR ( LH opposite) 163.0 lbs. ( 74.0 kgs.) Requires ( 6) A78-314 plow bolt assemblies 421-70-12122CNR 158.0 lbs. ( 71.7 kgs.) Requires ( 6) A78-314 plow bolt assemblies TYPICAL END VIEW Hensley Half Arrow Bolt-On Edges - continued 13 LOADERS - CONTINUED Hensley Half Arrow Bolt-On Edges - continued WA450-3 / WA470 421-815-1221NR 42.0 lbs. ( 19.0 kgs.) Requires ( 2) A78-312 plow bolt assemblies each 421-815-1211RCNR ( RH shown) 421-815-1211LCNR ( LH opposite) 110.0 lbs. ( 50.4 kgs.) Requires ( 4) A78-312 plow bolt assemblies each 421-815-1211CNR 144.5 lbs. ( 65.6 kgs.) Requires ( 6) A78-312 plow bolt assemblies TYPICAL END VIEW WA470-5 421-815-2220NRHX 37.6 lbs. ( 17.1 kgs.) Requires ( 3) A78-300 plow bolt assemblies 421-815-2211NRHX 88.0 lbs. ( 40.0 kgs.) Requires ( 2) A78-300 plow bolt assemblies 14 LOADERS - CONTINUED Hensley Half Arrow Bolt-On Edges - continued WA500-1 ( S/ N 20001) / WA500-3 TYPICAL END VIEW 425-815-2210RNR ( RH shown) 425-815-2210LNR ( LH opposite) 222.0 lbs. ( 100.7 kgs.) Requires ( 4) A10-400 plow bolt assemblies 425-815-1320NRHX 149.0 lbs. ( 67.6 kgs.) Requires ( 4) A10-400 plow bolt assemblies WA500-1 ( S/ N 10001 - 19999) 425-815-1120RNR ( RH shown) 425-815-1120LNR ( LH opposite) 62.0 lbs. ( 28.1 kgs.) Requires ( 2) A10-400 plow bolt assemblies each 425-815-1110CNR 217.0 lbs. ( 98.4 kgs.) Requires ( 4) A10-400 plow bolt assemblies TYPICAL END VIEW 15 LOADERS - CONTINUED Hensley Half Arrow Bolt-On Edges - continued 425-815-1510RLNRHX 192.0 lbs. ( 87.1 kgs.) Requires ( 4) A10-400 plow bolt assemblies WA500-3 425-815-1520NRHX 61.8 lbs. ( 28.0 kgs.) Requires ( 2) A10-400 plow bolt assemblies each 425-815-1510CNRHX 201.0 lbs. ( 91.2 kgs.) Requires ( 4) A10-400 plow bolt assemblies TYPICAL END VIEW WA600-1 / WA600-3 426-815-1110NRHX 236.0 lbs. ( 107.1 kgs.) Requires ( 4) A138-400 plow bolt assemblies 426-815-1130NRHX 85.0 lbs. ( 38.6 kgs.) Requires ( 4) A138-400 plow bolt assemblies TYPICAL END VIEW TYPICAL END VIEW 16 DIRECT REPLACEMENT RIPPER PRODUCTS 2 3 4 1 131-78-31190HX 20.4 lbs. ( 9.3 kgs.) 141-78-11253HX 27.7 lbs. ( 12.6 kgs.) T141-78-11254 28.0 lbs. ( 12.7 kgs.) 175-78-31230HX 34.0 lbs. ( 15.3 kgs.) T175-78-31230 est. wt. 31.3 lbs. ( 14.2 kgs.) 175-78-31230S-HX 33.0 lbs. ( 15.0 kgs.) T195-78-21331 42.2 lbs. ( 19.2 kgs.) 195-78-21331HX 41.1 lbs. ( 18.7 kgs.) See Dimensions in Chart Tooth Pocket 195-78-21331RC 58.0 lbs. ( 26.3 kgs.) 141-78-11253S-HX 30.5 lbs. ( 12.6 kgs.) Ripper Teeth, Shank Guards, and Segments D40/ D45-1, D40/ D41-3 -- 131-78-31190HX -- 4-7/ 8 ( 124) 4-29/ 32 ( 125) 2-5/ 16 ( 59) D50/ D53-16, D50/ D53-17 D57S-1, D66S-1 D60/ D65-7, D60/ D65-8 -- 141-78-11253HX 141-78-11253S-HX 5-5/ 8 ( 143) 4-29/ 32 ( 125) 3-1/ 16 ( 78) D65-12, D75A-1 T141-78-11254 D75S-3, D75S-5 D85E-SS-2A D85-18 25001- 175-78-31230HX T175-78-31230 7-1/ 4 ( 184) 5-3/ 16 ( 132) 3-1/ 4 ( 83) D85-21 35001 175-78-31230S-HX D135A-1 10001- D135A-2 10301- D150A-1 7190- D155A-1 7190- D155A-2 50001 D155A/ AX-3 60001 D275A-2 10001- 195-78-21331HX T195-78-21331 8-5/ 8 ( 219) 6-1/ 16 ( 154) 3-5/ 16 ( 84) D355A-3 1632- 195-78-21331RC D455A 1007- 198-79-11230HX T198-79-11230 10-3/ 8 ( 264) 7-3/ 16 ( 183) 4-1/ 8 ( 105) D375A-1 15001-15366 195-78-71140HX -- 8-3/ 8 ( 213) 6-7/ 16 ( 164) 3-1/ 4 ( 83) D375A-1 15367- 195-78-71320HX 195-78-71350HX 8-15/ 32 ( 215) 6-1/ 16 ( 154) 3-1/ 4 ( 83) D375A-2 16001- D475A-1, D475A-2 -- 198-78-21340HX 198-78-21370HX 10-13/ 32 ( 264) 7-9/ 32 ( 185) 4-1/ 8 ( 105) D575A -- T19M-78-11341 -- 7-3/ 4 ( 197) 7-9/ 32 ( 185) 5 ( 127) GD825A-2 -- 235-785-1310HX -- -- -- -- Dresser TD25 -- 1313564H1HX -- 7-3/ 4 ( 197) 5-3/ 8 ( 136) 3 ( 76) 1 2 3 4 5 6 7 8 10 9 Serial Number Tooth Optional Tooth Machine Model Pocket Dimensions: Inches ( MM) A B C Reference Number 11 17 FOR KOMATSU DOZERS & MOTOR GRADERS 235-785-1310HX 39.6 lbs. ( 18.0 kgs.) T19M-78-11341 39.6 lbs. ( 18.0 kgs.) 5 6 7 8 195-78-71140HX 53.0 lbs. ( 24.0 kgs.) T198-79-11230 69.0 lbs. ( 31.3 kgs.) 198-79-11230HX 65.6 lbs. ( 29.8 kgs.) 195-78-71320HX 49.8 lbs. ( 22.6 kgs.) 195-78-71350HX 62.0 lbs. ( 28.1 kgs.) 198-78-21370HX 82.0 lbs. ( 37.2 kgs.) 198-78-21340HX 88.0 lbs. ( 39.9 kgs.) 9 10 Motor Grader Tooth 11 Dresser Dozer 1313564HIHX 36.0 lbs. ( 16.3 kgs.) 092-44-02496P -- -- -- -- 175-78-21740P -- -- -- -- 175-78-21740P 175-78-21693MHX 195-78-21320HX 195-78-21580HX 175-78-21740P ( under development) 175-78-21740P 17M-78-1340HC* 195-78-21320HX 195-78-21580HX 175-78-21740P 17M-78-21360HX 426-847-2310P -- -- -- -- 175-78-21740P -- 195-78-71110HX -- 175-78-21740P 195-78-71360P 195-78-71380HX 195-78-72410HX -- 092-44-03036P 198-78-21340PL 198-78-21430HX 198-78-21330HX 198-78-21390HX 198-78-21340PL -- -- -- -- -- -- -- -- -- -- 092-44-02488P -- -- -- -- Tooth Pin Lower Segment Shank Guard Optional Guard Guard Pin * under development 18 DIRECT REPLACEMENT RIPPER PRODUCTS - CONTINUED Weld-on Segments 198-78-21390HX 148.0 lbs. ( 67.1 kgs.) Shank Guards 195-78-71380HX 126.0 lbs. ( 57.1 kgs.) 198-78-21430HX 198.0 lbs. ( 89.8 kgs.) 195-78-72410HX 111.0 lbs. ( 49.9 kgs.) 198-78-21330HX 86.0 lbs. ( 39.0 kgs.) 17M-78-21360HX 112.0 lbs. ( 50.8 kgs.) 19 Ripper Replacement Pins DIRECT REPLACEMENT RIPPER PRODUCTS - CONTINUED Shank Guards - continued 195-78-21580HX 51.7 lbs. ( 23.5 kgs.) 195-78-21320HX 33.6 lbs. ( 15.3 kgs.) 195-78-71110HX 54.0 lbs. ( 24.5 kgs.) A B Pin Part Number 3-25/ 32 ( 96) 31/ 32 ( 25) dia. 4-5/ 8 ( 117) 31/ 32 ( 25) dia. 5-21/ 32 ( 143) 1-5/ 32 ( 29) dia. 6 ( 152) 1-3/ 16 ( 30) dia. 092-44-02496P 175-78-21740P 426-847-2310P 198-78-21340PL Dimensions: Inches ( MM) 20 REPLACEMENT PARTS FOR KOMATSU DOZERS End Bits Fits: D50A, D53A D60, D65 model dozers. 140-70-11180HX ( RH shown) 140-70-11170HX ( LH opposite) 35.8 lbs. ( 16.2 kgs.) Requires ( 5) A34-400 plow bolt assemblies each Fits: D475A-1 D475A-2 model dozers. 198-71-31530HX ( RH shown) 198-71-31520HX ( LH opposite) 317.0 lbs. ( 143.8 kgs.) Plow-bolts not available from Hensley Industries. Fits: D375A-1 D375A-2 D375A-3 model dozers. 195-71-61940RH ( RH shown) 195-71-61930LH ( LH opposite) 260.0 lbs. ( 118.0 kgs.) 21 PLOW BOLT ASSEMBLIES* DIMENSIONS w/ Hex Nut w/ Hex Cone Nut Bolt Length Diameter w/ Threads per Inch A34-200 3/ 4" 10 2" A34-300 3/ 4" 10 3" A78-300 7/ 8" 9 3" A78-314 7/ 8" 9 3-1/ 4" A78-400 7/ 8" 9 4" A10-200 AC10-200 1" 8 2" A10-312 AC10-312 1" 8 3-1/ 2" A10-334 AC10-334 1" 8 3-3/ 4" A10-400 AC10-400 1" 8 4" A10-412 AC10-412 1" 8 4-1/ 2" A114-300 AC114-300 1-1/ 4" 7 3" * Plow Bolt Assemblies consists of Plow Bolt with Nut. Hensley plow bolt assembly numbers designate the diameter and length of the bolt. example: A10-312 First number indicates bolt diameter which in this case is 1” . Second number indicates bolt length which in this case is 3-1/ 2” . REPLACEMENT PARTS FOR KOMATSU DOZERS PLOW BOLT ASSEMBLIES Fits: D575A-2 model dozers. 19M-72-13220HX ( RH shown) 19M-72-13210HX ( LH opposite) 472.0 lbs. ( 214.0 kgs.) Plow-bolts not available from Hensley Industries. End Bits - continued Part Replacement Note: 19M-72-21710 uses 19M-72-13210HX 19M-72-21720 uses 19M-72-13220HX 22 NOTES 23 NOTES 24 Customer Service Toll Free U.S. / Canada Phone: ( 888) 406 - 6262 Fax: ( 888) 241 - 3274 All Other Locations Phone: ( 972) 406 - 6262 Fax: ( 972) 241 - 3274 Hensley Industries, Inc. 2108 Joe Field Rd. • Dallas, TX 75229 SAFETY FIRST: Hensley recommends that you use a soft-faced hammer and ANSI-approved ( Z87.1) eye protection while using our products. Your Authorized Hensley Dealer VISCOTAQ® is a worldwide patented viscous elastic pipeline technology coating that is used for corrosion prevention of pipelines, storage tanks, soil to air transitions, above ground fl anges, pipe crossings and in the ditch applications. VISCOTAQ® also offers a unique waterproofi ng line of products to stop water infi ltration at pipe casings, buildings, vaults, storm drains, sewer lines and more. VISCOTAQ® products have been tested extensively by external laboratories, international oil and gas companies as well as in fi eld trials. The VISCOTAQ® products differentiate from any other product by being a synthetic viscous elastic solid, combining excellent adhesion based upon the Van Der Waals bonding principle, while being a solid with no dripping behavior.Serving the industry! VISCOTAQ® is a unique viscous-elastic amorphous a-polar poly-olefi n for the protection against corrosion of underground and above ground substrates in the pipeline industry, petrochemical industry, utility and water industry. VISCOTAQ® has been devel-oped in cooperation with leading companies in the oil and gas industry and polymer engineering companies to meet the demand for new viscous elastic coating products with unique and better properties for the protection of shaped and non shaped substrates. The result is a product that offers the pipeline industry an unrivaled technology when it comes to corrosion prevention. The philosophy behind VISCOTAQ® The philosophy behind the development of VISCOTAQ® is that, unlike other coatings, VISCOTAQ® always has a permanent and intimate contact with the surface of the substrate. The viscous mod-ulus and the elasticity modulus of the material are designed in such a way that the viscosity modulus gives permanent wetting charac-teristics, forcing the material to fl ow into the pores and anomalies of the substrates, whereas the elasticity modulus gives the strength and elasticity of a solid. Moreover, VISCOTAQ® eliminates typical problems that occur during pipeline rehabilitation in the fi eld and the problems of different phenomena that occur in practice. How VISCOTAQ solves typical pipeline corrosion problems• Elimination of salt and osmosis problems… Due to the very low permeability of water, its a-polar behavior and extremely good adhesion on a molecular level, VISCOTAQ® inhibits water molecules from traveling to the surface of the substrate. In conjunction with its low viscous characteristics, no pressure can build behind the coating that could cause blisters and de-lamination.• Elimination of adhesion problems and surface preparation problems… VISCOTAQ® bonds on the principle of Van Der Waals bonding, creating an intimate contact with the substrate. VISCOTAQ® has a low surface tension and keeps “ wetting” the surface. Due to the viscous-elastic state and its formulation, VISCOTAQ® will keep this bond permanently for decades to come. VISCOTAQ® bonds aggressively to almost any surface and is forgiving when it comes to surface preparation. The minimum surface preparation for use is ST-2/ SSPC3, although a blasted surface SA2½ / SSPC10 is strongly recommended.VISCOWRAP has a strong bond to the pipe surface and a perfect cohesive fractureApplication of VISCOWRAP in The Middle East.Protection of underground fl anges and pipe connections with VISCOTAQValve VISCOTAQ® Features and Benefi ts• Viscous-elastic amorphous a-polar polyolefi n• Immediate adhesion to substrate without primer• Remains in pliable and fl exible state• Permanent wetting characteristics• Wide temperature range up to + 100° C/ + 202° F• Glass transition temperature < -40 ° C/ -40 ° F) • Self-healing characteristics• Eliminates MIC• No curing time• Forgiving on surface preparation ( minimum commercial wire brush) • Cohesive Fracture ( peel test) • 100% inert formulation, no solvents, no primers• Material remains in semi-solid state over entire lifetime• Virtually impermeable to moisture• No problems with salts or osmosis• Extremely low Cathodic disbondment values ( 0-3mm/ 0-0, 12” to ASTM G8) • Excellent dripping/ sliding resistance due to high yield point• Weather resistant/ UV resistant• Easy failure-free application• Elimination of problems with aggressive soils, MIC and degradation… VISCOTAQ® is based upon low molecular weight amorphous a-polar polyolefi ns with no reactive groups, free radicals or solvents. Therefore, the material is 100% inert and stable, safe and non-hazardous. With the elimination of water and no sulfi de or nitrogen available in the polymer chains, all essential and necessary components for MIC are eliminated. Due to its inert characteristics and impermeability for water, VISCOTAQ® exhibits outstanding performance in areas with aggressive soils, high and low pH’ s and high sulfur and chloride contents.• Elimination of shear stress problems, sliding… To guarantee ultimate corrosion prevention, VISCOTAQ® remains in a pliable state during its lifetime. Therefore VISCOTAQ® has been extensively tested in conjunction with different protective outer layers to simulate shear stress. Unlike other products, VISCOTAQ® has shown excellent resilience against shear stress due to the combination of the appropriate outer layer as well as the viscous-elastic solid state of the material.Manufactured under ISO 9001 and stringent quality controls… VISCOTAQ® is manufactured under ISO 9001 standards from raw materials to end product. During this process, many quality control checks are in place to guarantee the highest quality. In addition to in-house quality control, VISCOTAQ® has been tested thoroughly by independent accredited laboratories.protection with VISCOWRAP in the Far EastTank Chime protection with EZ-WRAP and VISCOSEALANT Application of VISCOWRAP and VISCOPASTE in the USA VISCOTAQ.COMVISCOWRAP-STVISCOWRAP-ST is a viscous-elastic self healing wrap coating for the protection of under- and aboveground substrates against corrosion. VISCOWRAP-ST can be used in environments or on substrates with an ambient or surface temperature up to + 71° C/ + 160° F. VISCOSLEEVEVISCOSLEEVE is a viscous-elastic self healing two layer heat shrink sleeve system for the protection of fi eld welded joints in heavy duty situations, like pipe laying vessels ( barges offshore) and pipeline systems. VISCOSLEEVE can be applied on joints with temperature conditions of + 80° C/ + 95° C or + 176° F/ + 203° F C onshore and offshore.VISCOSHIELDVISCOSHIELD is a UV curing polyester and is used for situations where a higher mechanical or higher temperatures up to + 100° C/ + 212 ° F are expected.KLEISS & CO. B.V.Scheepmakersstraat 17, 3334 KG ZwijndrechtThe Netherlandsinfo@ kleiss.nlVISCOWRAP-HTVISCOWRAP-HT is a viscous-elastic self healing wrap coating for the protection of under- and aboveground substrates against corrosion. The material can be used in environments or on substrates with an ambient or surface temperature up to + 100° C/ + 212° F.EZ-WRAPEZ WRAP is viscous-elastic self healing wrap coating for the protection of under- and aboveground substrates against corrosion and water fi ltration. EZ-WRAP has a polyester top coating that can be painted. The material can be used in environments or on substrates with an ambient or surface temperature up to + 65° C/ + 149° F. EZ-Wrap has been originally developed for the protection of tank chimes where it is combined with VISCOSEALANT.POLYCUREPOLYCURE Is a water curing polyurethane and is used in situations where a higher mechanical impact or higher temperatures are expected. It can be used for under water application in combination with VISCOSEALANT.VISCOPASTEVISCOPASTE is viscous-elastic self healing paste for the protection of under- and aboveground substrates against corrosion. The material can be used in environments or on substrates with an ambient or surface temperature up to + 71° C/ + 160° F. WRAPVISCOTAQ PE outer wrap is used for the mechanical protection of VISCOTAQ material up to a temperature of + 85° C/ + 185° F.VISCOSEALANTVISCOSEALANT is a viscous-elastic corrosion preventive and sealing paste for sealing all type of openings and holes against the fi ltration of moisture and gases. LUG - WIRE, FORK. SIZE 6, WIRE RANGE 16 TO 14 AWG, NYLON INSULATED, BLUE COLOR, 100 PCS/ BOX. MFG THOMAS & BETTS, P/ N RB14-6F ( QTY 1 BOX) CONNECTOR - CABLE, 2-WAY. SIZE 1 AWG, 600 VAC, 15/ 32 IN OD, 1-7/ 16 IN LONG, MATL COPPER, DIE COLOR KEY GREEN. MFG THOMAS & BETTS, P/ N 54508 ( QTY 6 EACH) CONNECTOR - CABLE, 2-WAY. SIZE 8 AWG, 600 VAC, 1/ 4 IN OD, 1 IN LONG, MATL COPPER, DIE COLOR KEY RED. MFG THOMAS & BETTS, P/ N 54504 ( QTY 14 EACH) TYRAP - CABLE, SELF LOCK. 1/ 16 TO 4 IN BUNDLE RANGE, 0.184 IN WIDE, 14.19 IN LONG. 100 PCS/ PACK. MFG THOMAS & BETTS, P/ N TY528M ( QTY 8 PACK) PAINT, RUST AND METAL PRIMER TYPE : WATER - BASE, NON - FLAMABLE COLOUR : OFF - WHITE TAN DRIES : 15 - 30 MINUTES NO CONTACT WITH WATER : 6 -8 HOURS PACKAGE : 1 GALLON CAN CONTAINER THE CRITICAL COVARAGE : 12.3 M2/ LT SPECIAL FEATURES : COMPLETED WITH MSDS CHEMSEARCH - NCH EUROPE INC. GROUP, CHELADE PLATINUM Before and after photos of rusty steel tag ( 1) being half coated with RUST ADJUST, and ( 2) after exposure to a corrosive environment. Stop rust in one easy step ü Chemically blocks & stops future rusting ü Minimal surface preparation when repainting a surface ü Excellent primer and compatible with most paints FEATURES & BENEFITS RESISTANT TO OXIDATION Chemically converts existing rust on surfaces into black protective barrier that is moisture-free. EASY TO USE Ready to use formula does not require sandblasting, grinding or scraping before application. Does not leave rust behind that can lead to corrosion under new paint layers PROTECTIVE BARRIER Excellent primer that can be directly painted over without further surface preparation Rust Adjust Polymeric Rust Converter Division of NCH Singapore Pte. Ltd. ( 196900108C) c/ o 386, Jalan Ahmad Ibrahim, Singapore 629156 www.mantek.com REMARKS: Use with propylene-glycol based anti-freeze may cause gelling of the coolant Technical Specifications Depends on thickness of rust Layer Thickness Coverage 1 Liter = 12 sq.mtrs. Flash Point Non--flammable · Natural gas compressors · Chemical plant compressors · Oil well drilling rigs · Agricultural pumps · Concrete mixing trucks · Portable air compressors · Construction welding rigs DIRECTIONS TO USE: APPLICATION AREAS Clean the surface to be treated from scale, grease, oil, dirt and loose powdery rust. 1. Simply brush or roll RUST ADJUST onto rusted surfaces 2. RUST ADJUST will work immediately to chemically convert existing rust into a moisture-free black protective barrier that resists further oxidation • Consult the label for full instructions & precautions before using this product. hub saleskehan@ gmail.com or sales1kehan@ gmail.com 081807489548 fax 62 21 5602582